Mark Levinson No.512

Nº 512 CD/SACD Player; Control Connectors: One Ethernet port One RS-232 port One IR port, 3.5mm mono mini plug One 3.5mm mono (tip/sleeve) mini plug trigger input, 12V One 3.5mm mono (tip/sleeve) mini plug trigger output, 12V One 3-pin IEC standard power connector Decodable Formats: CD and SACD (two-channel layer) Dimensions (H × W × D): 4-9/16" × 17-3/8" × 17-5/8" (116mm × 442mm × 448mm) Dynamic Range: 108dB Fixed Output Level: 4V (balanced), 2V (single-ended) Frequency Response: 10Hz - 20kHz (+00dB/-0.2dB) PCM/CD 10Hz - 20kHz (+0.0dB/-0.5dB) DSD/SACD Maximum Output Level: 16V (balanced), 8V (single-ended) Operating Environment: Operating temperature: +5° to +35°C (41° to 95°F) Storage temperature: -20° to 55°C (-4° to 131°F) Operating humidity: 5% to 80% noncondensing Output Connectors: Two balanced XLR analog outputs Two single-ended RCA analog oututs Two digital outputs – one AES (XLR) and one S/PDIF (RCA) Output Impedance: 10Ω;Power Requirements: 100/120/220/230-240V~, 100W, 50/60Hz, factory set for destination country Signal-to-Noise Ratio: 108dB Total Harmonic Distortion: <0.003% (92dB) PCM/CD <0.002% (99dB) DSD/SACD Weight: Net weight: 32.5lb (14.7kg)

123 990,00 kn

Mark Levinson No.532

Nº 532 Dual Monaural Power :AmplifierControl Connectors: Two Link2 ports One Ethernet port One 3.5mm mono (tip/sleeve) mini plug trigger input, 3V-12V DC One 3.5mm mono (tip/sleeve) mini plug trigger output, 3V-12V DC 3-Pin IEC standard power connector Dimensions: Height (with feet): 9-9/16" (243mm) Height (without feet): 8-¾" (222mm) Width: 17-½" (445mm) Depth: 21-1/18" (536mm) Frequency Response: Within 0.1dB from 10Hz to 20kHz Input and Output Connectors: Two balanced XLR inputs Two unbalanced RCA inputs Two “Hurricane” loudspeaker outputs with banana-plug sockets (banana-plug sockets not available on the 230V AC models) Input Impedance: 100 kΩ (balanced), 50 kΩ (unbalanced) Operating Environment: Operating temperature: 0° to 35°C (32° to 95°F) Storage temperature: -30° to 75°C (-22° to 167°F) Relative humidity: 95% maximum without condensation Output Impedance: <20 mΩ, 20Hz to 20kHz Power Requirements: 100V~, 120V~, 230V~, 800W, factory set for destination country Rated Output Power: 20Hz to 20kHz at <0.5% THD, 400W per channel at 8Ω, full output from 2.59Vrms Signal-to-Noise Ratio: <85dB, reference level: 2.83Vrms Weight: Net weight: 121.5 lb (55.2kg) Shipping weight: 129.5 lb (58.8kg)

165 990,00 kn

Tannoy Arena

Arena Satellite PERFORMANCE Recommended amplifier power 15 - 100W Sensitivity (2.83V @ 1m) 88dB Nominal impedance 8 Ohms Frequency response (-6dB) 80Hz - 54kHz CROSSOVER Crossover frequency 1.75kHz mid to high, 80Hz to subwoofer Crossover type 2nd order low pass, 1st order high pass DRIVE UNIT Dual Concentric Driver LF 100mm (4.00") mixed fibre pulp cone, dynamic overload protection, HF 19mm (0.75") titanium dome with neodymium magnet system CONSTRUCTION Enclosure Type Ported Internal volume (Satellite) 2.0L, 0.07cu.ft Dimensions (Satellite) Including Grille 187.0mm x 133.5mm x 175.5mm Weight (Satellite) 2.5kg (5.5lbs) Arena Centre PERFORMANCE Recommended amplifier power 15 - 100W Sensitivity (2.83V @ 1m) 88dB Nominal impedance 8 Ohms Frequency response (-6dB) 80Hz - 54kHz CROSSOVER Crossover frequency 1.75kHz mid to high, 80Hz to subwoofer Crossover type 2nd order low pass, 1st order high pass DRIVE UNIT Dual Concentric Driver LF 100mm (4.00") mixed fibre pulp cone, dynamic overload protection, HF 19mm (0.75") titanium dome with neodymium magnet system Bass Driver 100mm (4.00") mixed fibre pulp cone CONSTRUCTION Enclosure Type Ported Internal volume 2.6L, 0.09cu.ft Dimensions Including grille 133mm x 245mm x 149mm Weight 4.0kg (8.8lbs) Arena Subwoofer PERFORMANCE Output Power 300W RMS Low Frequency Response (-6dB) 29Hz Limit for usable output 16Hz Input 1 x line level phono Input Filter 2nd order low pass, 50Hz - 150Hz, -6dB. Auto Mute After approximately 12 mins, in absence of input signal DRIVE UNIT Driver Type 250mm (10.00”) CONTRUCTION Enclosure Type Closed box Enclosure Volume 20.0L litre/ 0.7 cu.ft Additional Features Phase control, crossover defeat switch for LFE operation, soft limiting to avoid overload, LF extension control Enclosure Dimensions (Excluding feet) 445 x 350 x 210mm (17.50 x 13.75 x 8.25”) Weight 14.5kg / 32lbs Mains Voltage 120V nominal AC ~, 60Hz, 230V nominal AC ~, 50Hz Mains Fuse 120V - T3.15AL / 250V, 230V - T1.6AL / 250V Maximum Power Consumption 416VA

2 000,00 kn