Shunyata Hydra 8

Hydra-8 • “Trident Defense System” • 2400 watts @ 20 amps continuous • Surge protection (40,000A) • Four individual, isolated circuits • 16 element Venom Noise Filter • Massive CDA-101 buss bars • FeSi-1000 noise-reduction compound • Detachable 20A inlet • Aluminum chassis Dimensions: Height: 6” Width: 13” Depth: 9.5” Weight: 15.5lbs Ship Weight: 20lbs

10 000,00 kn

VPI Super Scoutmaster REF

Minimum Specifications: Wow and flutter-Less than .01%. Rumble-Greater than 85db down. Speed accuracy-Within .05%. Total weight-90 + pounds. Platter runout - +/- .001 inch. Product Specifications: Dual 300 RPM AC synchronous drive Drive belts custom-made for VPI from a single piece of Nitrile. Aluminum cone feet with stainless steel ball bearings on the bottoms. Solid acrylic platter with bronze bushings and Teflon thrust surface. Platter sits on 60 Rockwell-hardened shaft and chrome-hardened ball bearing.

Cambridge Audio 640P

Cambridge Audio 640P MM/MC Maksimalna potroąnja: 5W Gain @ 1kHz: 39dB / 55dB Nominal output: 300mV Sensitivity for nominal output: 3.35mV / 0.5mV THD 20Hz-20kHz: <0.007% RIAA curve accuracy <+/-0.3dB 20Hz-50kHz (subsonic filter off) Signal to noise ratio (using Audio Precision RIAA-1 with grounded inputs) >86dB / 72dB Crosstalk @ 20kHz: >76dB / >72dB Dimenzije (© x V x D mm): 215 x 133 x 46mm 8.5 x 5.2 x 1.8" Masa: 0.9kg/2lbs

500,00 kn

Burmester 948 power con.

948 Power Conditioner As a result of the increasing contamination of the power supply voltage, the current out of the wall socket is one of the weakest joints of a high-end sound system. In order to prevent a sound distorting impact, Burmester has carried-out a fundamental long-term research: we successfully identified a miniscule direct current offset of a few millivolts in the AC-voltage. The subsequently developed Power Conditioner is one of our most innovative objects, also indicated by its patent. The 948 Power Conditioner functions unlike any other conventional line filter on the world market. Basically, the 948 is a 500 W power amplifier that works in parallel mode with the AC power supply and, as an active system, compensates any DC offset in the AC mains from the wall socket. The 948 therefore influences the power supply from the outside, without constraining or reducing it. Our patented circuit design does not limit the power to the audio system in any way and hence, allows very powerful amps, including several large mono amps to be hooked up to the 948. With common passive filters this would only be possible at the price of deteriorating sound. The effected sound improvement is permanently stable throughout day and night. In addition, the 948 offers four 10A HF filters, which can be dispersed to any of the eight power outlet sockets in order to keep interferences from the connected components. All eight power sockets are star grounded.

23 000,00 kn

47 Laboratory 4730 Tuner

47 Laboratory Midnight Blue Model 4730 Tuner. 88~108Mhz antenae inputs: unbalanced 75 ohms (F connector) x 1 balanced 300 ohms x 1 output:RCA x 1 dimensions:123W~96H~206D(mm) weight:1.7kgm

Shunyata Hydra 6

Trident Defense System * 6,000 volts and 60,000 amps of surge protection * NextGen thermally protected TMOVs * Shunyata designed Venom filters (5-element) * Hydraulic electromagnetic circuit breaker (over current protection) * Each outlet individually filtered Massive Power Delivery System * Solid silver power distribution buss * Equivalent to an incredible 7-gauge wire * No point-point wiring * Detachable 20-amp power inlet Power Rating * 2400 watts (continuous – not a peak rating) * 20-amps continuous Chassis * 14 gauge all metal chassis * Professional rack mount faceplate * Threaded footers for after-market cones * All inlets and outlets mounted on back * Width: 19” Height: 3.5” Depth: 5.5” * Weight: 8.0lbs

5 900,00 kn

Theta Digital Gen VIII

Specifications Description: Digital-to-analog converter and analog line controller with remote control. Digital section: 5 digital inputs (2 S/PDIF RCA, 1 S/PDIF BNC, 1 S/PDIF TosLink, 1 AES/EBU XLR). Sampling rates: 32, 44.1, 48, 88.2, and 96kHz. 8x oversampling with Theta proprietary FIR filter running on 24-bit DSP processor with 56-bit accumulator (Motorola 56362). Analog input section: 2 stereo, RCA and XLR. Maximum input levels: 10V RMS (RCA), 20V RMS (XLR). Input impedance: 10k ohms. Frequency response: DC-20kHz, ±0.2dB. Dynamic range and signal/noise ratio: 125dB ref. 18V balanced input. Analog output section: Volume/balance control via switched resistor network. Frequency response: 20Hz-20kHz, ±0.01dB, ref. 1kHz. Output impedance: 25 ohms balanced, 12 ohms single-ended. Maximum output: 18V RMS balanced, 9V RMS single-ended. THD+noise at 1kHz, maximum output: <0.0012% balanced, <0.0035% single-ended. Dynamic range and S/N ratio: >115dB balanced, >112dB single-ended, A-weighted. Crosstalk: >140dB. Dimensions: 17.625" W by 5" H by 17.75" D. Weight: 29 lbs. Serial number : 026543.

Musical Fidelity X-PSU V3

Power outputs Four, each 12-0-12Volts AC 20VA Power requirement 230/115/100 Volts AC 50/60Hz Factory pre-set Power consumption 100 Watts Dimensions 180mm (7.1") wide 88.2mm (3.5") high including feet 208mm deep Weights Unit, net : 3.1 kg Total packed : 3.65 kg Accessories IEC mains lead (10 Amp type), Four DIN-to-DIN type low-voltage leads

Musical Fidelity X-10 V3

Input impedance 470KOhms Output impedance <33 Ohms THD <0.004% 10Hz to 20kHz Frequency response 20Hz to 65kHz+0, -0.5dB Crosstalk better than 80dB, 20Hz to 20kHz S/N ratio >93dB unweighted ref. full output >106dB "A" weighted ref. full output Valve (tube) type 6112 (two) Power requirement 12 - 0 - 12Volts AC 500mA (via mains adaptor supplied) Dimensions 180mm wide 88.2mm high including feet 218mm deep including RCA sockets Weights Unit, net : 2.5kg Adapter, net : 0.45kg Total packed : 3.1kg

Musical Fidelity X-LPS V3

MM input Sensitivity 3mV for 350mV output at 1kHz Input impedance 47K Ohms THD < 0.01% at 1kHz, 350mV out Input overload margin 30dB S/N ratio > 75dB unweighted > 83dB "A" weighted MC input Sensitivity 350μV for 350mV output at 1kHz Input impedance 100 Ohms THD < 0.01% at 1kHz, 350mV out Input overload margin 30dB S/N ratio > 65dB unweighted > 74dB "A" weighted General RIAA accuracy ± 0.25dB 20Hz to 20kHz Power requirement 12 - 0 - 12Volts AC 500mA (via mains adaptor supplied) Dimensions 180mm wide 88.2mm high including feet 208mm deep. Weights Unit, net : 2.5 kg Adaptor, net : 0.45 kg Total packed : 3.1 kg

Panasonic PT-AE2000E

Features: * Detail Clarity Processor for Excellent and Sharp Images * Full High Definition Home Cinema Projector with True 1,920 x 1,080 pixels x 3 Panels Resolution * Super High Contrast Ratio 16,000:1 * 3 HDMI Interfaces * Bright 1,500 ANSI Lumen * Horizontal and Vertical Lens Shift Function * Vertical Keystone Correction * Cinema Filter for Natural Colour Matching and Wide Colour Space Supporting xvYCC Colour * Lens Centre Design * 16 Bit Gamma and Dynamic Iris * VIERA Tough Panel * Lead Free Panel * Pedestal Included, Wall Hanging Bracket Optional

16 000,00 kn

Primare T21 Tuner

Tuning range (50kHz steps) 87.5 – 108.0MHz Tuning range Japan (50kHz steps) 75.5 – 90.5MHz Usable sensitivity: Mono 0.9μV, 75Ω, DIN Stereo 20μV, 75Ω, DIN Capture ratio 2.0dB Image rejection ratio 100dB IF Rejection Ratio 100dB Signal-to-noise ratio: Mono 76dB Stereo 70dB Alternate channel attenuation 90dB, IHF AM suppression ratio 50dB Subcarrier product rejection 76dB THD: Mono 0.05% (Wide) Stereo 0.15% (Wide) Frequency response 20Hz – 15KHz, +0.3/-0.8dB Stereo separation 43dB at 1kHz (Wide) 40dB at 70 – 10kHz Output voltage 0.775V Output impedance 600Ω Muting level 18dBf, 2.2μV, 75Ω Antenna impedance 75Ω Functions: Antenna inputs 1 IF Narrow/Wide, RDS, Stereo/Mono

3 000,00 kn

Dynavector DV-20XL

SPECIFICTIONS Type :Low output moving coil cartridge with flux damper and softened magnetism Output Voltage 0.3mV (at 1KHz, 5cm/sec.) Channel Separation 25 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency response 20 - 20,000Hz (± 2dB) Compliance 12 x 10-6 cm/dyn Tracking force 1.8 - 2.2grams DC resistance 150 ohms / 5 ohms Recommended load resistance > 1Kohms / > 30 ohms Cantilever 6mm length, hard aluminium pipe Stylus Micro-Ridge Weight 9.1 grams

4 800,00 kn

Rondo Reference Vision MK2

Rondo Reference s lakoćom nosi svoj ultimativni high-end status među audio-policama zahvaljujući svom ąirokom obliku, superiornoj i potvrđenoj konstrukciji, te briľljivom izboru materijala kao i postupku zavarivanja. 6 odvojenih polica sa 2 lica.

10 000,00 kn

Musical Fidelity A3 Tuner

FM TUNER with Remote Control and RDS; Tuning range 87.50 MHz - 108.00 MH In 50 kHz steps Antenna impedance 75 Ohms, coaxial Usable sensitivity mono -13.5 dBF 50dB quieting sensitivity mono -19.9 dBf stereo -42 dBf Alternate channel selectivity 55dB ±400 kHz Image rejection 98MHz >92dB IF frequency 10.7 MHz IF rejection 98MHz >95dB Adjacent channel selectivity (IHF) 52dB Pilot suppression (IEC) 30dB Subcarrier suppression (IEC) 32dB Audio output (1kHz, 75kHz deviation) 500mV Frequency response 30Hz - 15kHz ± 1dB Stereo separation (1kHz)>38dB S/N ratio mono >68dB stereo >65dB Power consumption 15 watts Power requirements (Factory preset for country) 100/115/230 Volts AC 50/60Hz Dimensions (mm) 440 x 92 x 300 (W x H x D) Height and width include feet. Depth includes connectors. Standard accessories Remote control handset Four batteries (SUM-4, AAA, LR03) 75 Ohm coaxial aerial connector

Stalak za pojačalo Rondo Pro base

punjen pjeskom

750,00 kn