Robertoshop - second hand shop

VTL IT-85

High power, capable of driving a wide range of loudspeakers. Remote controlled volume and mute with custom remote wand, automatic mute on power up and down. All-tube full preamp line stage, with buffered pre-out and regulated B+. Amplifier-driven headphone output, front panel selector switch (pre out mutes on headphone insertion). No-load automatic shutdown in headphone circuit. Front panel selectable direct amp in / processor loop input. Built-in upgrade path for precisely gain-matched horizontal biamping with VTL ST-85. Extruded machined aluminum front panel in silver (standard) or black, and protective cage. High quality VTL ST-85 power supply components and output and power transformers. Easily accessible individual output tube bias measurement and adjustment points on top deck. Angled-back chassis for easy access of inputs and outputs, sturdy quality structural fit and finish. Detachable IEC power cord, high quality gold-plated VTL custom binding posts and RCA jacks. All hand-built in the VTL California factory. Optional separate MC/MM phono stage available.Vacuum Tube Complement 2 x 12AU7, 2 x 12AT7, 4 x EL34 Output Power 20 Hz – 25 kHz ± 0.1dB < 3% THD (Stable to 2W) (Load settings: Speakers: 5W Headphones: 50 - 500W) into 4W Tetrode = 80 watts into 8W Tetrode = 60 watts Small signal frequency response (< 0.2% THD @ 1W) 1 - 75 kHz -3dB Class of output operation AB1 Inputs / Outputs 5 Single-ended RCA / 1 pair 5 way binding posts Input Sensitivity / Impedance Line in: 180 mV, Amp in 575 mV / Line in 20KW, Amp in 135KW Output Impedance Amp Out: 1.55W, Headphone out: 16W, Preamp out: 400W Power Consumption Idle = 200W Full Power = 600W Dimensions W x D x H 15.75 x 11 x 7 inches 40 x 28 x 17.75 cm Weight per unit 65 lbs (29.5 Kg) fully packed

GamuT D200 Mk II

D200 Mk II Specifications: Type: solid-state single MOSFET stereo power amplifier Power output (per channel, continuous): 200W/8Ω, 400W/4Ω Frequency response: 5Hz ~ 100kHz THD: ‹ 0.05% Noise level: › 100dBA below 100W/8Ω Input impedance: 40kΩ balanced, 20kΩ RCA Sensitivity: 0.77V, 1.55V, 3.1V, 3.9V (full power) Speaker loads: down to 1.5Ω Idle power consumption: 100 W Dimensions: 430 x 155 x 446 mm Weight: 31 kg

Audio Note Jinro

Audio Note Jinro. 211 SE integrated amplifier, 5687 input stage driving an in-house designed and made 1:2 copper wired driver transformer on a double HiB C-core, standard Level 3 components, Beyschlag resistors, etc., in-house designed and made copper wired double HiB C-core output transformer, 2 x NOS 5R4WGB rectifiers, HiB double C-core mains transformer.

127 500,00 kn

GamuT Si100

Specifikacije: 130W @ 8 ohma, 200W @ 4 ohma, SNR 100 dBA, THD 0,05%, Dimenzije (ąxdxv) 431 x 420 x 111 mm, 20 kg

Accuphase E-350

Continuous Average Output Power (both channels driven, 20–20,000 Hz) 140 watts per channel into 4 ohms 1 120 watts per channel into 6 ohms 1 100 watts per channel into 8 ohms m Total Harmonic Distortion (both channels driven, 20–20,000 Hz) 0.03% with 4 to 16-ohm load m Intermodulation Distortion 0.01% m Frequency Response HIGH LEVEL INPUT/POWER IN 20 – 20,000 Hz +0, –0.2 dB (for rated continuous average output) 3 – 150,000 Hz +0, –3.0 dB (for 1 watt output) m Damping Factor 120 (with 8-ohm load, 50 Hz) m Input Sensitivity, Input Impedance m Output Voltage, Output Impedance PRE OUTPUT: 1.13 V, 50 ohms (at rated continuous average output) m Gain HIGH LEVEL INPUT → PRE OUTPUT: 18 dB POWER IN → OUTPUT: 28 dB m Tone Controls Turnover frequency and adjustment range BASS: 300 Hz ±10 dB (50 Hz) TREBLE: 3 kHz ±10 dB (20 kHz) m Loudness Compensation +6 dB (100 Hz) m Attenuator –20 dB m Signal-to-Noise Ratio (input-converted noise) m Power Level Meters Logarithmic compression, peak reading meters Output dB/% scale m Load Impedance 4–16 ohms m Stereo Headphones Suitable impedance: 8–100 ohms m Power Requirements AC 120 V/230 V 50/60 Hz (Voltage as indicated on rear panel) m Power Consumption 49 watts idle 280 watts in accordance with IEC 60065 m Maximum Dimensions Width 465 mm (18-5/16”) Height 171 mm (6-3/4”) Depth 422 mm (16-5/8”) m Mass 21.7 kg (47.6 lbs) net 26.0 kg (57.3 lbs) in shipping carton m Supplied Remote Commander RC-200 Remote control principle: Infrared pulse Power supply: 3 V DC (IEC R03 batteries × 2) Maximum dimensions: 56 mm × 175 mm × 26 mm Mass: 153 g (including batteries)

Krell KAV-400xi

Specifications. Description: Solid-state, remote-controlled, stereo integrated amplifier with 5 line-level inputs (1 balanced, 3 single-ended, 1 single-ended tape loop) and 1 set of single-ended preamplifier outputs. Power output: 200Wpc into 8 ohms (23dBW), 400Wpc into 4 ohms (23dBW). Output impedance: 0.17 ohm. THD: 1kHz <0.04%; 20kHz <0.25%. Input impedance: 47k ohms. Input sensitivity: 644mV RMS. Power consumption at idle/standby: 20W. Dimensions: 444mm W by 90mm H by 436mm D. Weight:16.4kg.

11 000,00 kn

McIntosh MA 6500

Specifikacije: MA6500 Integrated Amplifier Specifications FREQUENCY RESPONSE: 20Hz to 20kHz, +0 / -0.5dB TOTAL HARMONIC DISTORTION 0.005% max. at any level from 250 milliwatts to rated power output per channel from 20Hz to 20kHz. INTERMODULATION DISTORTION SMPTE 0.005% maximum if instantaneous peak output does not exceed 400W per channel POWER OUTPUT 200, 120 watts minimum sine wave continuous average power output per channel, both channels operating, into a load impedance of 4, and 8 ohms respectively. A-WEIGHTED SIGNAL-TO-NOISE RATIO Power amp: 110dB below rated output High level: 100dB below rated output (90dB IHF) Phono: 90dB below 10 mV input (84dB IHF) INPUT IMPEDANCE: High level: 22k ohms Phono: 47k ohms, 65pf Main in: 20k ohms OUTPUT LOAD IMPEDANCE: 4 or 8 ohms INPUT SENSITIVITY High level: 250mV for 2.5V rated output (50mV IHF) Phono: 2.5mV for 2.5V rated output (o.5mV IHF) Main in: 2.5V for rated output DAMPING FACTOR :230 (8 ohms), 120 (4 ohms) RATED POWER BAND: 20Hz to 20kHz DYNAMIC HEADROOM: 2.4dB MAXIMUM PREAMP VOLTAGE OUTPUT: 8V from 20Hz to 20kHz MAXIMUM INPUT SIGNAL: High level: 8V; Phono: 90mV VOLTAGE GAIN : High level to tape: 0dB; High level to main: 20dB TONE CONTROLS: Bass and treble: + 12dB POWER GUARD: Clipping is prevented and THD does not exceed 2% with up to14dB overdrive at 1kHz

18 000,00 kn

Audio Research LS-16 mk II

Specifications Frequency response ±.1dB, 1Hz to 60kHz at rated output. -3dB points below 0.5Hz and above 100kHz Distortion (THD) .01% at 1V RMS Balanced output Noise & hum 25µV RMS residual IHF weighted Balanced noise output with gain control with gain control at minimum (98dB below 2V RMS output). Gain Main Output - 12.2dB unbalanced Tape output - 0dB Input impedance 150K ohms Balanced. 75K ohms SE . Inputs (7): AUX SE, PHONO, TUNER, CD BAL, AUX BAL, MONITOR (SE), and PROCESSOR (SE). Output impedance 600 ohms Balanced, 300 ohms SE Main (2), 40K ohms minimum load and 1000pF maximum capacitance. Outputs (4): 2 Main Bal, 1 Main SE, 1 Record SE. Output polarity Maximum inputs 14V RMS maximum Balanced (7V RMS SE) Rated outputs 2V RMS (1V RMS SE) into 200K ohm Balanced load (maximum Balanced output capability is 30V RMS at 1% THD at 1kHz). Power supplies Electronically regulated low and high voltage supplies. Automatic 45-sec. warmup mute. Automatic brown-out mute. Tube complement LS16 MKII: (2) 6H30 dual triode Power requirements 100-135VAC 60Hz (200-270VAC 50/60Hz) 45 watts maximum. Other Controls: Volume, Input Select. Toggle switches: Power On/Off, Operate/Mute, Monitor/Input, Processor/Input. All functions on Remote Control. Dimensions 19" (48 cm) W x 5.25" (13.3 cm) H (standard rack panel) x 10.5" (26.7 cm) D. Handles extend 1.50" (3.8 cm) forward of front panel. Weight 11.9 lbs. (5.4 kg) Net; 21 lbs. (9.5 kg) Shipping.

11 000,00 kn

Lehmann Black Cube SE

LEHMANN BLACK CUBE SE PHONO STAGE Technical Specifications: Input Sensitivity for output level of 755mV/0dB: 3,8mV/1kHz (MM), 380uV/1kHz Gain 1kHz: 46dB (MM), 66dB (MC) Max. Input Level 1kHz: 32mV (MM), 3mV (MC) Channel Deviation: typ. max. 0,5dB Channel Crosstalk: fx=1kHz Greater Than 86dB, fx=10kHz Greater Than 85dB Input Impedances: 47kOhms/1kOhms/100 Ohms switchable on board the audio PCB. One place for custom impedance on board the audio PCB. One additional hard wire slot for direct effectivity. No soldering required. Input Capacitance: 100pF Output Impedance: Less Than 100 Ohms Impedance Following Stage: Greater Tan 10kOhm recommended Power Consumption: approximately. 3VA External Power Supply: +/- 15VDC Dimensions: Audio Section (W x D x H): 113x108x45mm cubed. Power Supply (W x D x H): 66x110x55mm cubed.

Audio Research LS-15

Specifications Frequency response ± .5dB, 2Hz to 30kHz at rated output. -3dB points below 0.3Hz and above 80kHz. Distortion (THD) Less than .01% at 2V RMS balanced output Noise & hum 25µV RMS residual IHF weighted balanced noise output with gain control at minimum, 98dB below 2V RMS output Gain Main output: 12.5dB balanced, 6.5dB SE Tape output: 0dB Input impedance 200K ohms balanced, 100K ohms SE Output impedance 600 ohms balanced, 300 ohms SE Main (2), 40K ohms minimum load and 1000pF maximum capacitance. Output polarity Maximum input 14V RMS maximum balanced, 7V RMS SE Rated outputs 2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 30V RMS at less than 1% THD at 1kHz Power supplies Electronically regulated low and high voltage supplies. Automatic 30 second warmup mute. Automatic brown-out mute. Tube complement (4) 6922/ECC88 dual triode. (Vacuum tube audio circuit, solid-state power supply) Power requirements 100-135VAC 60Hz (200-270VAC 50/60Hz) 35 watts maximum Other Inputs: SE1, SE2, SE3, SE4, Bal, Direct (Bal) and Monitor (SE) Outputs: 2 Main Bal, 1 Main SE, 1 Record SE Dimensions 19" (48 cm) W x 5.25" (13.3 cm) H (standard rack panel) x 10.5" (26.7 cm) D. Handles extend 1.50" (3.8 cm) forward of the front panel. Weight 11.6 lbs. (5.3 kg) Net; 20 lbs.(9.1 kg) Shipping

E.A.R. 912

Specifikacije: Specifications Description: Tubed stereo preamplifier. Tube complement: five 7DJ8/PCC88. Phono inputs: 2. Line inputs: 2 balanced, 3 unbalanced. Tape loops: 1. Outputs: 1 balanced, 1 unbalanced. Input impedances, phono: 47k ohms, moving-magnet; 3, 6, 12, or 40 ohms, moving-coil. Output impedance: 600 ohms. Line-stage gain: 14dB. Phono-stage gain: 50–80dB. Signal/noise ratio: 68dB phono (ref. 2.4mV), 90dB line (ref. 1V). Frequency response: 20Hz–20kHz, –0.3dB. Distortion: <0.1% at 1kHz, 3V output. Phase-inverting: No.

35 000,00 kn

Krell Evolution 402

Evolution 402 Stereo Amplifier 400, 800, 1600 wpc (8, 4, 2 ohms);5000 VA power supply.The signal path incorporates Krell Current Mode and CAST circuitry using proprietary multiple-output current mirrors in a complementary and balanced arrangement for extraordinary open loop linearity.46.4 cm wide x 24.8 cm high x 55.9 cm deep.The power supply makes use of extensive electrical and magnetic shielding to keep radiated interference out of critical amplifier circuits. Internal high current line conditioning circuitry filters RF noise on the AC mains, as well as compensating for asymmetric power waveforms and DC on the mains.

79 900,00 kn

Pathos InPol2

Specifications for the Pathos Inpol2 Amplifier; Volume Control 1dB steps by means of an optical device which drives a battery of relays (vacuum packed, with thorium contacts), which drive a network of precision resistors (1%, metal layer). Output Power: 2 x 45W @ 8Ω Frequency response: 10Hz - 80kHz ± 0.5dB THD: <0.05% .Signal/noise ratio >90dB. Input impedance 100kOhm. Power source:230V 50Hz. Absorption at rest 240W. Dimensions: 430 mm Width,185 mm Height, 430 mm Depth.

25 000,00 kn

Accuphase P-7100

Inheriting the design policy of the models M-8000 and P-7000, this stereo power amplifier is capable of delivering an amazing 1000 watts per channel into ultra-low impedance loads of one ohm. The amplifier circuitry employs the instrumentation amplifier principle with fully balanced signal transmission. Circuit boards with fluoropolymer glass fabric substrate featuring extremely low dielectric constant and low loss assure pure signal transmission. Further improved MCS+ topology and current feedback design result in even better S/N ratio, distortion, and other performance parameters for outstanding electrical characteristics as well as sound quality. Each channel features 11 wideband power transistors arranged in a parallel pushpull configuration. Together with the large 1.5 kVA toroidal power transformer, this assures linear power progression down to extremely low 1-ohm loads. Bridged mode allows upgrading to a monophonic amplifier with 2000 watts into 2 ohms. GUARANTEED SPECIFICATIONS •Continuous average output power per channel: 125 watts (8 ohms), 250 watts (4 ohms), 500 watts (2 ohms), 1,000 watts (1 ohm, music signal) / Bridged operation: 500 watts (8 ohms), 1,000 watts (4 ohms), 2,000 watts (2 ohms, music signal) •Frequency response: 0.5 - 160 kHz +0, –3.0 dB •Intermodulation distortion: 0.01% or less •Damping factor: 300 •S/N ratio: 122 dB or better (A weighted) •Rated input: 1.26 V MAIN FEATURES •Logarithmic compression type analog power meters •Meter ON/OFF switch •Mode switch •Input selector button •Gain selector •Balanced inputs •Maximum dimensions: 465 (W) x 258 (H) x 545 (D) mm (18-5/16" x 10-3/16" x 21-7/16") •Mass: 49.0 kg

Accuphase C-2410

The C-2410 is a high-end control center that uses advanced technology and only the finest parts to bring out the true essence of the music. Inheriting superb design know-how from the C-2810, it features a further improved AAVA (Accuphase Analog Vari-gain Amplifier) volume control. AAVA is a revolutionary concept that completely eliminates variable resistors from the signal path. This has a number of distinct advantages and results in high performance and sound quality far exceeding conventional designs. The C-2410 is an analog preamplifier with an array of useful features including tone controls, EXT PRE connectors, and independent phase selection for each input position. An optional phono equalizer unit enables playback of analog records with ultimate sound quality. Elegant side panels with persimmons wood finish further enhance the exquisite appearance of the product. GUARANTEED SPECIFICATIONS (with AD-2810 installed) •THD: 0.005% or less (20 - 20,000 Hz) •Frequency response: 3 Hz - 200 kHz +0, –3.0 dB •Rated input: DISC (MC) 0.2 mV/0.1 mV, DISC (MM) 8 mV/4 mV, CD/LINE 252 mV •Rated output: 2.0 V •S/N ratio: CD/LINE 109 dB, DISC (MM) 95 dB/89 dB, DISC (MC) 80 dB/75 dB MAIN FEATURES •With AD-2810 installed: equalizer gain selector, MC input impedance selector •Phase selector •Gain selector •Loudness compensator •Recorder selector •Tone controls •Balanced inputs and outputs •Headphone jack •EXT. PRE connector •Supplied remote commander •Maximum dimensions: 465 (W) x 150 (H) x 409 (D) mm (18-5/16" x 5-7/8" x 16-1/8") •Mass: 18.9 kg (with AD-2810 installed: 19.8 kg)

E.A.R. 890

Specifications: Description: Stereo tubed power amplifier with inout level controls. Tube complement: two 6AQ8, two 12AX7, eight KT90. Output power: 70Wpc into 8 (18.45dBW) or 16 ohms (21.45dBW). Power bandwidth: 15Hz-40kHz at <3.0% THD. Input impedance (measured at 1kHz): 55k ohms, unbalanced or balanced. Input sensitivity: 1.0V. Signal/Noise Ratio: 92dB (no ref. level specified).

Misical Fidelity kW 550

Output: Voltage, RMS 70 Volts 20Hz to 20 kHz Voltage, Peak-to-peak 201 Volts Power 630 Watts per channel into 8 Ohms (28dBW), 910 Watts per channel into 4 Ohms Current peak-to-peak 200 Amps Damping factor 200 Output devices per channel 12 Pre-out impedance 50 Ohms Line inputs: Harmonic distortion at 1 kHz 0.005% THD + noise, 20Hz to 20 kHz < 0.01% typical Signal / noise ratio > 99dB ‘A’-weighted Input sensitivity for 630 Watts 450mV Input impedance 220k Ohms Overload margin 37dB Channel separation > 75dB typical Frequency response 20Hz to 20 kHz, +0, -0.2dB 20Hz to 60kHz +0, -1.4 dB Phono input: RIAA/IEC combined response Signal / noise ratio > 96dB ‘A’-weighted Input sensitivity 3.0mV (MM) 0.4mV (MC) Input impedance 47k Ohms (MM and MC) Overload margin 24dB (MM and MC) Connections: Line level inputs: 5 pairs line level RCA connectors, 1 front panel 3.5mm jack socket (sharing AUX 1 input) 1 pair phono (MM/MC) RCA connectors, Line level outputs: 1 pair RCA [preamp] controlled by the volume, 1 pair RCA [tape record] fixed line level output. Speaker outputs: 2 pairs 4mm banana plug/binding posts per channel. Power requirement: 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 1950 Watts maximum into 8 Ohms, 120 Watts idle Standard accessories: IEC type mains lead (16-Amp type), Power supply lead, main (two) 0.7M long, + (two) 1.2M long Power supply lead, for pre-amplifier (one) 0.7M long + (one) 1.2M long Remote control (KW, universal type), 2 batteries size LR03 or AAA, manganese alkaline type Main unit Power supply Dimensions: 485 mm, 19.1 inches wide 365mm, 14.4 inches wide 170 mm, 6.7 inches high inc. feet 170mm, 6.7 inches inc. feet 470 mm, 18.5 inches deep inc. terminals 440mm, 18.5 inches inc. terminals Weight 23 kg, 51lbs unboxed 32kg, 70lbs unboxed 28kg, 62lbs in shipping carton 35kg, 77lbs in shipping carton

27 000.00 kn

Naim Audio Nait 3

Specifications : Inputs:Tuner, Tape, CD,Phono Input sensitivity:75mV, 100kohm Overload margin:40dB Power output:8 ohm, 30 watts per channel (Continuous) Weight:5 kg Dimensions(w x d x h)43.5 x 31.5 x 6.5 cm. Made in England

Ayre K-5 xe Preamp

Specifications: Input Impedance: 20 kohm (per phase). Output Impedance: 55 ohm (per phase). Frequency Response: DC - 200 kHz. Maximum Gain: 4 dB - unbalanced outputs. 10 dB - balanced outputs. Maximum Input Level: 4 Vrms - unbalanced inputs. 8 Vrms - balanced inputs. Power Consumption: 10 watts. Dimensions: 43.8cm x 35cm x 12cm. Weight: 11.5 kg

Ayre V-5 xe Power Amp

Specifications: Power Output: 150 watts per channel continuous into 8 ohms. 300 watts per channel continuous into 4 ohms. Gain: 26 dB. Input Impedance: 100 kohm (per phase). Frequency Response: DC - 200 kHz Power Consumption: 10 watts in standby mode 100 watts in operating mode, no signal. Dimensions:45.7cm x 41cm x 18cm Weight:25 kg

Ayre L-5 xe Power Filter

Features: * Individual filtering and grounding of each outlet. * No current limiting * Ferrite-free construction. * Rhodium plated contacts. Specifications: Four individual outlets, Modular: IEC inlet 11.5 AWG internal conductors Dimensions: 43.8cm x 35cm x 6cm Weight:5.5 kg

Leben RS-100

NOVO, Jamstvo 12 mjeseci.RS-100U SPECIFICATIONS Tubes Compliment 2 x 12AU7A 1 x 6X5GT (Sylvania) Gain 23dB Max. Output 52V (Variable) & 0V - 52V(fixed) Output Impedance 600 Ohms Residual Noise 0.08mV Power Consumption 23W Weight 7.5 kg Dimensions 390(W) x 230(D) x 142(H) mm (Incl. Side-panels & Legs) Attachment. AC Power Cable x 1

23 120,00kn

Leben CS-660P

NOVO, Jamstvo 12 mjeseci.CS-660P Specifications Tubes Compliment (4) KT-66, (EL34/6CA7 - Option) (4) 6CS7 (1) 6CJ3 Output Power Stereo 40W x 2 (KT-66) at 1KHz. Mono 80W X 1 (KT-66) at 1KHz. Frequency Response 10Hz - 180KHz. (-3dB) Input Sensitivity 1.5V at 40W Input Impedance 100KO Output Impedance 4/8/12/16 Ohms (Selectable) Power Consumption 230W Weight 18.0kg Dimensions 415(W) X 480(H) X 320(D) mm Attachment Detachable AC Power Cable x 1 Optional Tubes KT77 KT88 KT100 6L6GC/5881 6550A 6CA7 350B KT90 5881

49 200,00 kn

Leben CS-300X

NOVO, Jamstvo 12 mjeseci. CS-300XS SPECIFICATIONS Tubes Equipped EL84 X 4 5751(G.E.) X 2 Output Power 15W X 2 Frequency Response 15Hz - 100KHz (-2 dB) Distortion 0.7% (10W) Input Sensitivity 600mV Output Impedance 4/6/8 Ohms (Selectable) Power Consumption 65W Weight 10.5 Kgs. Dimensions 360(W) X 270(D) X 140(H) mm Attachment Detachable AC Power Cable x 1

17 000,00 kn

Unison Research Simply 845

Simply 845 Class A triode stereo integrated amplifier.Using one ECC 82, one ECC 83, and one 845 for output this unit produces 24 wpc output. This self biasing unit is easy to operate with the input selector on the top left of the unit with the volume control on the left on the front panel.

20 000,00 kn

Lector ZOE

S P E C I F I C A T I O N : E L E C T R I C A L P E R F O R M A N C E Unit description: Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd output Tube active circuit: 6H30II, by SATC circuit: 6922/12AT7/12AU7/6CG7/12BH7 Frequency response: 20-50.000 Hz +/- 1 db THD distorsion: Less of 0.1 % Input sensibility and gain: 200 mV / 20 db gain / 50 kohm input Output voltage and impedance: 20 Volt @ 250 ohm Optional: Remote control handset,cherry wood veenerede side panels Power supply main: 100V/120V/230V ac 70 V/A Dimension, weight (net): 400 (L) x 110 (H) x 300 (D) Kg.10 E L E C T R I C A L P E R F O R M A N C E Unit description: Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd output Tube active circuit: 6H30II, by SATC circuit: 6922/12AT7/12AU7/6CG7/12BH7 Frequency response: 20-50.000 Hz +/- 1 db THD distorsion: Less of 0.1 % Input sensibility and gain: 200 mV / 20 db gain / 50 kohm input Output voltage and impedance: 20 Volt @ 250 ohm Optional: Remote control handset,cherry wood veenerede side panels Power supply main: 100V/120V/230V ac 70 V/A Dimension, weight (net): 400 (L) x 110 (H) x 300 (D) Kg.10 Unit description: Stereo tube line level preamplifier with 5 inputs, 2 main outputs, passive volume out, tape out, h.t.d.. output module Tube active circuit: on series: 6922 SATC circuit: 6H30II / 12AT7 / 12AU7 / 6CG7 / 12BH7 Frequency response: 20 - 50.000 Hz +/- 1 db THD distorsion: Less of 0.1 % Input sensibility and gain: 200 mV / 20 db gain / 50 kohm input Output voltage and impedance: 20 Volt @ 250 ohm Optional: Remote control handset, cherry wood veenerede side panels Power supply main: 100V / 120V / 230V ac 70 V / A (factory set) Dimension, weight (net): 400 (L) x 110 (H) x 300 (D) Kg.10 net

6 000,00 kn

Prima Luna Dialogue Two

Specifications Output: 38 watts x 2 ultralinear, 21 x 2 triode Freq. Response: 10Hz-30kHz +/- .5dB THD: Less than 1% at full power S/N Ratio: 89dB Input Sensitivity: 270mV Power Consumption : 250 watts Dimensions: 15.2" x 8.3" x 16" (WxHxD) Weight: 63.8 lbs Inputs: 5 pair RCA / 1 pair HT bypass Outputs: 4 and 8 Ohm speaker taps / 1 pair RCA fixed tape output Tube Compliment: 2 - 12AX7, 2 - 12AU7, 4 - KT88

KR Audio VA340

SPECIFICATIONS for VA300 Power Tubes 2 x KR300BXLS Output Power 2 x 20 WRMS (THD=3%) Output Impedance 4 or 8 ohm Frequency Response 20Hz - 20KHz (-3dB) Feedback zero Damping Factor Approx. 2.8 Preamplifier solid-state with mechanical (reed) relays Remote Control Volume & channel selector Inputs 4 x line RCA (Cinch) Input Sensitivity 0.75VRMS/47k ohm @ 20W (for all channels) Power requirements 230/115VAC , 50/60 Hz Power consumption 240VA Operating temperature 5C to 40C Weight Approx. 36Kg Shipping Weight Approx. 44Kg

Krell KSL

SPECIFICATIONS: GAIN:7.5 dB SIGNAL-TO-NOISE < -90 dB unweighted THD 1K < 0.01% 20K < 0.01% INPUT IMPEDANCE 47,000 ohms(47K) OUTPUT IMPEDANCE 11 ohms OUTPUT VOLTAGE 8 volts R.M.S. DIMENSIONS 19" WIDE 14" DEEP 2.5" HIGH with feet WEIGHT Unit only 19 pound, s packed 24 pounos

8 500,00kn

Krell 300 CX

Description: The Full Power Balanced 300cx Stereo Power Amplifier is designed for the audiophile who wants the ultimate sound quality from a stereo amplifier with power capabilities of 300 Watts per channel into 8 Ohm, 600 Watts per channel into 4 Ohm, and 1200 Watts per channel into 2 Ohm loudspeaker loads. - Fully balanced circuitry from input to output insures signal integrity, rejects noise, and improves signal-to-noise ratios to deliver a ""night and day"" sonic difference when compared to typical single-ended circuitry. - Computer regulated power supply provides consistent sound quality at wide dynamic range regardless of fluctuating line voltages. - Current mode operation ensures wide bandwidth and accurate harmonic reproduction for lifelike sound reproduction. - Class A operation to full rated output redistributes minor distortion by-products and delivers clear transient sounds and harmonically correct overtones. - Proprietary Krell output and driver transistors assure substantial output current capability.

Gryphon Callisto 2100

Technical Specifications: Frequency Response : 20Hz – 20kHz, +0.0 / -0.2dB. 0.25 – 250kHz, +0 / -3dB. Input impedance : 10K Av Input impedance: 47K THD+N : 1kHz < 0.05%, 20kHz < 0.25%. Signal to Noise < -100dB “A-weighted” Gain : 38dB. Input sensivity : 350mV. Input sensivity AV-input : 1V. Output Power : Both channels driven 2 x 100Watt in 8 Ohm. 2 x 200Watt in 4 Ohm. 2 x 350Watt in 2 Ohm. Output voltage : RMS : 28.3V Peak to Peak : 80 V Output impedance : 0.038 Ohm Power consumption : Idle : 130Watt. Max : 800Watt. Dimensions: H. 145 mm W. 480 mm. D. 420 mm. Weight Shipping weight 21 kgs. Unit only 18 kgs

McIntosh MC2102

MC2102 Tube Power Amplifier Features CUSTOM OUTPUT TRANSFORMER Unique McIntosh-wound transformer delivers the full rated amplifier output with the least possible distortion and maximum bandwidth into loudspeaker impedances of 2, 4, or 8 Ohms; you get all the power you paid for and the freedom to choose any loudspeaker. WATTMETER Swift, accurate response reveals program peaks so staying within the power limits of your loudspeakers is easy. BALANCED INPUTS Allows the use balanced cables for 40dB better rejection of induced noise. MONO MODES Mono-Bridge and Mono-Parallel modes enable the MC2102 to deliver a full 200 watts as a mono amplifier into 1,2,4,8 or 16 Ohm loads. Tube Compliment (8) KT88 (4) 12AX7A Input Tubes (4) 12AT7 Driver Tubes Ceramic Tube Sockets with Gold-Plated Contacts Patented Unity Coupled Circuit with Bifilar-Wound Output Transformers Soft-Start Inrush Protection Remote Power Control Trigger

Pass Aleph 3

SPECIFICATIONS Gain Freq. Response Power Output Distortion Output Impedance Input Impedance DC offset Power Consumption Dimensions Shipping Weight 20 dB - 3 dB at 100 kHz 30 watts @ 8 ohms < 1 % THD .1 ohm 23 Kohm single ended input 100 mV 200 watts 12 " W x 12 " D x 6.5" H 40 lb.

7 500,00 kn

Hovland HP-200

Input impedance: 100 kΩ Gain: 14 dB; non-inverting Frequency response: +0/-.25 dB, 10 Hz - 25 kHz THID: < .1 % at rated output of 3 volts Output impedance: 2500 ohms (Unbalanced, RCA), 600 ohms (Balanced, XLR) S/N ratio: 80 dB below 3 volts out, A-weighted (at full level) Inputs: 5 line-level remote-selectable; 1 unity-gain front panel selectable Processor-Direct; 1 “Monitor Loop” front panel selectable. Outputs: 1 pair balanced XLR, 1 pair single-ended RCA; 1 unbuffered “Record” Other Connections: 12VDC output jack for triggering amplifiers or other equipment having remote turn-on capability. RS-232 serial port allows for programmed control of preamp functions when integrated into audiophile/home theater automation systems. Tube complement: Line (2)-12AX7, (1)-12 AT7 Power requirements: 0.5 A Casework dimensions: 18.25" W x 15.52" D x 4.88" H (with feet) Net Weight: 12.2 kg Warranty: Three years parts and labor (tubes - 90 days)

Hovland HP-100

Line Stage Input impedance: 100 kΩ Gain: 14 dB Frequency response: +0/-.25 dB, 10 Hz - 25 kHz THID: < .1 % at rated output of 3 volts S/N ratio: 80 dB below 3 volts out, wideband Phono Stage (46 dB gain) Minimum input voltage: approx. 0.7 millivolt @ 1000 Hz Input impedance: 1 meg ohm Frequency response: ±0.15 dB, 25 Hz - 25 kHz S/N ratio: 60 dB below 2 mv input wideband 75 dB below 2 mv input w/ 400 Hz high-pass filter MC Phono Stage with MC-7 Transformer (63 dB gain) Maximum input voltage: approx. 1.0 millivolt @ 1000 Hz Input impedance: approx. 530 Ω (provision for reduced loading) Tube complement: Line (2)-12AX7, (1)-12AU7 Phono (2)-12AX7, (1)-12AT7 Power requirements: 0.5 A Casework dimensions: 18.25" W x 17.38" D x 5.25" H (with feet) Warranty: Three years parts and labor (tubes - 90 days)

Korato KTA-100

KTA 100 replaces the Model ONE.5, the amp that made Korato known in the international circles and which received a few very positive reviews abroad. KTA 100 continues the same tradition of simplicity and quality. The construction is completely dual mono with two 500VA toroidal power transformers and 144,000 mF worth of electrolytic caps. It has 3 pairs of Motorola bipolar output transistors per channel in a totally mirror image circuit. It is internally wired with VdH SCS 12 & 18 cables and has gold plated teflon connectors. Works in class A up to 30W. Specifications: output power: 100W/8ohms; 200W/4ohms; 340W/2ohms frequency response: 4Hz-156kHz THD: 0.08% gain: 28dB damping factor: >200 sensitivity: 1.2V s/n ratio: 102dB dimensions: w 480; d 450; h 180mm weight: 23 kg

4 000,00 kn

Yamaha RX-V 2700

High Sound Quality 7-channel powerful surround sound: 140W x 7 RMS Digital ToP-ART with superior audio-grade parts and devices used throughout Pure Direct for higher fidelity sound reproduction 3 in/1 out HDMI (ver. 1.2a) for handling digital signals including Super Audio CD Assignable amplifiers for bi-amp connection High Picture Quality 1080p compatible HDMI (3 in/1 out) High-definition video up-conversion Up-scaling (480i/576i to 1080i/720p) De-interlacing (480i/576i to 480p/576p) Wide-range video bandwidth (100MHz -3 dB, 1080p compatible) Advanced Facilities Network Receiver functions (Internet radio, PC music files, USB portable audio players and flash drives, MusicCAST) iPod compatibility via optional Yamaha YDS-10 Compressed Music Enhancer Improved YPAO sound optimization with 6 system memories GUI on-screen display (6 languages: English, French, German, Spanish, Russian and Japanese) Superior zone control with additional zone remote unit and zone multi-language OSD Surround Realism Upgraded CINEMA DSP with 23 DSP programmes Dolby Digital EX and DTS-ES 96/24 compatibility

4 500,00 kn

Burmester 032

Specifikacije • Nominalna snaga: Stereo: 2 x 240 W (4 ohma) • Stalno pojačanje: 30 A • Faktor priguąenja: >1800 • Omjer signala i ąuma: >81 dB • Ulazna osjetljivost: promjenjiva • Frekvencijski odziv: 0-200kHz (-3dB) • 4 tranzistora snage po kanalu • Vrijeme uspona (stereo/mono): 1,4 μs na 4/8 ohma opterećenja, 1,9 μs na 1 ohma opterećenja • Povećano napajanje sa kapacitetom filtera od 90.000 μF i polukruľnim transformatorom od 600 VA • Teľina: 36 kg • Dimenzije: 482 x 216 x 482 mm

50 000,00 kn

Pass Laboratories X2

SPECIFICATIONS Gain: 10 dB (normal) 16 dB (high gain) Freq. Response: -3 dB @ 5 Hz -3 dB at > 100 kHz Distortion: < .01 % THD @ 2 volts rms balanced < 1% @ 18 volts rms balanced (normal) < 1% @ 40 volts rms balanced (high gain) Maximum Output: 18 volts rms. balanced out (normal) 40 volts rms. balanced out (high gain) Output Impedance: 1000 ohms each output polarity Input Impedance: 10 kOhm unbalanced 20 kOhm balanced CMRR: less than –50 dB, 20-20 KHz typically less than –67 dB @ 1 KHz Crosstalk: less than –60 dB, 20-20 KHz typically less than –80 dB @ 1 KHz Output Noise: 80 microvolts rms 20-20 KHz band unweighted Power Consumption: 30 watts Dimensions: 17 " W x 11.5 " D x 3.5" H Shipping Weight: 35 lb

10 000,00 kn

Sim Audio MOON P5.3

Type Solid State Configuration Dual Mono Design Open Loop / Balanced Differential Single-ended inputs (RCA) 4 pairs Balanced Inputs (XLR) 1 pair Input Device Types J-FET Input Impedance 22,000 Ω Input Sensitivity 200mV - 4.0V RMS Balanced Outputs (XLR) 1 Pair Single-Ended Outputs (RCA) 2 Pairs (fixed & variable) Output Impedance - XLR / RCA 100 Ω / 50 Ω Gain Control M-eVOL Gain 9dB Signal-to-noise Ratio 109dB @ full output Maximum Output Voltage - XLR / RCA 12 Volts / 6 Volts Frequency Response 5Hz - 100kHz (+0 / -0.1dB) Crosstalk @ 1kHz < -110dB IMD unmeasurable THD (20Hz - 20kHz) < 0.002% 12 Volt Trigger Output Operation Direct Logic (0V = off, 12V=on) using a 3.5mm mono microphone jack with a 1000 Ω input impedance of and current requirement of 12mA. IR input 1/8" mini-jack Available Faceplate Finishes Black and Silver Remote Control All-Aluminum Full Function AC Power Requirements 120V / 60Hz 240V / 50Hz Power Consumption idle 6 watts Fuse Replacement - 120V 0.2A slow blow Fuse Replacement - 230V 0.1A slow blow Shipping Weight 25 lbs / 11 kgs Dimensions (W x H x D) 17.0 x 3.9 x 15.3 in. (43.2 x 10.0 x 38.8 cm.) Optional Phono Section: Input Impedance - Adjustable 100 Ω and 47K Ω Input Capacitance - Adjustable 0pF and 100pF Gain - Adjustable 40dB and 60dB Input overload @ 40dB gain 58mV RMS Input overload @ 60dB gain 3mV RMS Signal-to-noise Ratio (full scale @ 40dB gain) 107dBr Signal-to-noise Ratio (full scale @ 60dB gain) 85dBr Frequency Response 20Hz - 20kHz (±0.5dB) Crosstalk @ 1kHz -97dB IMD < 0.009% THD (20Hz - 20kHz) < 0.001%

24 000,00 kn

Sim Audio MOON W5.3

Type Solid State Configuration Stereo Power Supply Transformer 1kVA Power Supply Capacitance 115,000µF Class Of Operation A/AB Single-ended Inputs RCA - 1 pair Balanced Inputs XLR - 1 pair Input Device Type J-FETs Input Impedance 47,500 Ω Input Sensitivity 1V RMS Output Device Type Bipolars - 8 per channel Output Binding Posts 5-way / Gold-plated / Shielded Output Power @ 8 Ω 150 Watts Output Power @ 4 Ω 300 Watts Output Power @ 2 Ω 500 Watts Output Power - Bridged Mono 600 Watts Frequency Response 10Hz - 125kHz (+0/-3dB) Output Impedance 0.01 Ω Damping Factor (static) 800 Gain 31dB Dynamic Headroom 6dB Signal-to-noise Ratio 100dB @ full power Maximum Output Voltage 40 Volts Slew Rate 40V/µs Maximum Current - Peak / Continuous 38 amperes / 20 amperes Crosstalk @ 1kHz -100dB IMD Unmeasureable THD @ 1 watt / @ 150 watts (20Hz-20kHz) < 0.02 % / < 0.05 % 12 Volt Trigger Operation Direct Logic (0V = off, 12V=on) using a 1/8" mini-jack with an input impedance of 2K Ω and current requirement of 6mA Available Faceplate Finishes Black and Silver Power Consumption @ idle 45 Watts AC Power Requirements 120V / 60Hz 240V / 50Hz Fuse Replacement - 120V 6A long fast blow Fuse Replacement - 230V 3A long fast blow Shipping weight : 22 Kg Dimensions (W x H x D)17.9 in.17.8 x 19.6 x 45.5 cm.

34 200,00 kn

Cyrus Q Power

Specifications Continuous Power - 50W/CH (both driven into 8 Ohms) 70W/CH (both driven into 4 Ohms) Distortion - <0.004%, (1kHz into 8 Ohms) <0.01%, (20Hz-20kHz into 8 Ohms) Frequency Response - -3 dB at 1Hz and 80kHz Current - 30 Amps peak to peak Sensitivity - (RCA input) 380mV (for 50W stereo into 8 Ohms) Input impedance - 10Kohm (RCA) Output voltage - 380mV (Chain out) S/N Ratio - 110dBA Dimensions - (H x W x D) 73 x 215 x 360 (mm) Weight - 4.6kg Finish - Silver

2 800,00 kn

KR Audio Kronzila SX

SPECIFICATIONS Single Ended Tube Amplifier - Pure Class A, Zero Feedback Output Tubes 2 x T1610 ( Kronzilla ) Output Power 2 x 50 Watts RMS (THD=3%) Bandwidth 20 Hz-20 kHz (-3dB) Output Impedance 4, 8 Ohms Input 1V RMS / 47k Ohms at 50 W Dimensions (w/h/d) 38.5 x 41.5 x 55 cm Weight Approx. 50kg

45 000,00 kn

Cary Audio Design SLP 05

Line-level, remote-controlled stereo preamplifier with one tape loop, a Cinema Bypass mode, single-ended and balanced outputs, and a headphone output. Preamp inputs: 3 single-ended, 2 balanced. Input impedance: 50k ohms single-ended, 100k ohms balanced. Maximum gain: 10dB (16dB) single-ended, 8dB (12dB) balanced (see "Measurements" sidebar). Noise & hum: –90dB ref. full output. Frequency range: 5Hz–250kHz. Output impedance: 400 ohms. Dimensions: Preamplifier: 435mm W by 160mm H by 310mm D. Weight: 7.25 kg. Power supply: 435mm W by 115mm H by 310mm D. Weight: 8.6kg.

30 000,00 kn

Onkyo A-9155

• 65 W/Ch Minimum into 4Ω, 1 kHz, 2 Channels Driven, IEC • Optimum Gain Volume Circuitry • All Discrete Output Stage Circuitry • Audiophile-Grade Capacitors • Precision Motor-Driven Volume Control • Tone Control (Bass,Treble, Loudness On/Off) • Direct Mode for Bypassing Tone Control • Phono Equalizer • 4 Audio Inputs and 2 Outputs • Phono Input • Speaker A/B Drive • High-Rigidity,Anti-Resonant Chassis • Aluminum Front Panel and Volume Knob • Banana Plug-Compatible Speaker Posts • Headphone Jack • Compatible with RI Dock for the iPod • RI (Remote Interactive) Remote Control

1 790,00 kn

Onkyo TX-SR 307

Rated Output Power North American: 65 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz-20 kHz with a maximum total harmonic distortion of 0.7 % (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0.9 % (FTC) European: 1 ch × 100 W at 6 ohms, 1kHz, 1 ch driven (IEC) Asian: 1 ch × 120 W at 6 ohms, 1kHz, 1 ch driven (JEITA) Dynamic Power 160 W (3Ω, Front) 125 W (4Ω, Front) 85 W (8Ω, Front) THD (Total Harmonic Distortion) 0.08% (1kHz, 1 W) Damping Factor 60 (Front, 1kHz, 8Ω) Input Sensitivity and Impedance 200 mV/ 47 kΩ (LINE) Output Level and Impedance 200 mV/ 470 Ω (REC OUT) Frequency Response 20Hz–50kHz/ +1 dB–3 dB (Direct) Tone Control ±10 dB, 50Hz (BASS) ±10 dB, 20kHz (TREBLE) Signal to Noise Ratio 100 dB (LINE, IHF-A) Speaker Impedance 6Ω–16Ω

1 990,00 kn

Lyngdorf TDAI 2200

PARAMETER VALUE NOTE Output power, 4 Ohms 2 x 375 Watt 1KHz, 0.1% THD+N Output power, 8 ohms 2 x 200 Watt 1KHz, 0.1% THD+N Nominal load impedance 4 - 8 ohms It is safe to operate the amplifier with no load Frequency response 0.3Hz-33KHz -3dB points, 8ohms load. Frequency response 20Hz-20KHz -0dB/+0.2dB 8ohms load Output impedance 0.025 ohms 20Hz-1KHz Output impedance 0.4 20KHz THD+N 0.015% @1W/8 ohms A-wgt. THD+N 0.02% @1 W/4 ohms A-wgt. THD+N 0.008% @100 W/8 ohms A-wgt. THD+N 0.07% @375 W/4 ohms A-wgt. S/N ratio 107dB A-wgt. Ref. 200 /8 ohms Dynamic range 133dB A-wgt. Ref. 200 W/8 ohms Channel separation 90 dB 1 KHz, 200 W/8 ohms Peak output current +/-40A Mains voltage range 115 version 100-120V AC, 50-60 Hz Mains voltage range 230 version 200-240V AC, 50-60 Hz Power consumption Standby mode 1.5W Power consumption On mode, no output 40W Power consumption 2 x 37.5 W / 4 Ohms 116W Power consumption 2 x 300 W / 4 Ohms 820W Width 450 mm Depth 440 mm Height 100 mm Net wwight 14.5 Kg Shipping weight 22.0 Kg

Denon AVC-A1XV

Audio Section * 96/24 Converters * 192/24 Converters * Audio Evolutivity : 6.1 * Power (Multi Channels) : 7 x 170 W / 8 Ohms Miscellaneous Informations * THX Ultra 2 * OSD Supported formats * Dolby Surround Pro Logic * Dolby Digital * Dolby Surround Pro Logic II * Dolby Digital Matrix * DTS * DTS Matrix * DTS Discrete * DTS Neo 6 * HDCD * Dolby Digital Surround EX * DTS 96/24 * Dolby Prologic 2X * Dolby Headphone Audio Connectors * Audio Analog Inputs : 13 * Optical Inputs : 5 * Coaxial Input : 2 * Analog Audio Outputs : 10 * Optical Output (TOSLink) : 3 * RS232 Input/Output : 1 * Proprietary Digital Link Video Connectors * Video Inputs : 9 * Y/C Inputs : 9 * Component Inputs : 6 * Video Output : 7 * Y/C Outputs (SVideo) : 7 * Component Outputs (YUV) : 3 * HDMI Input/Output : 1 Miscellaneous * Dimensions : 434 x 280 × 505 * Weight : 44.0 kg

18 000,00 kn

Nagra PLL

Technicalspecifications: Input impedance > 110 kOhm Output impedance 60 Ohm Signal-to-noise ratio 100 dB (A-weighted) at 12 dBV Min Vin for 0 dB out 0.25 Vrms Max Vin for 0 dB out 25 Vrms Bandwidth 10 Hz – 100 kHz + 0 / – 1 dB Distortion < 0.01 % 1 V out, no load at 1 kHz < 0.03 % 1 V out, 600 Ohm load Vacuum tubes 2 12AX7 / ECC83 1 12AT7 / ECC81 Power consumption 12 V 900 mA Dimensions Width 310 mm (12.2 inches) Depth 254 mm (10 inches) Height 76 mm (3 inches) Weight 3.20 kg (7 lbs.)

62 000,00 kn

Nagra PSA

Technical Specifications: Power 100 W rms into 8Ω For 1 or 2 V input (selectable) Bandwidth 10 Hz to 70 KHz +0 / -3 dB Signal to noise ratio Typically 104 dB Measured in ASA A THD+N < 0.09 % @100 W Size 38x38x30 cm (14.9x14.9x11.8 inches) Weight 10 Kg (22 lbs) The PSA is fully compliant with CE requirements

44 000,00 kn

Unison Research C5P

Technical Specification Valve compliment 3 x ECC 83 double triodes Frequency range 10-100kHz Dimensions (w, d, h) 270mm x 470mm x 200mm Weight 10 kg

8 000,00 kn

Conrad Johnson Premier 14

New Tubes just installed (4) G6K5 NOS Tubes Mullard.Specifications: Classic design with solid Aluminum remote. Gain: 25 dB Phase: Phase Inverting Maximum Output is 20 VRMS Distortion: less than .25% THD or IMD at 1.0 V output Response: bandpass 2Hz to more than 100kHz Line Stage 96 dB below 2.5 volt output Dimensions: 19" x 3 " x 15 "

16 000,00 kn

Conrad Jhonson Premier 12

Specifications: Description: Tubed /6550/ mono power amplifier. Power rating: 140Wpc into 8 ohms/140Wpc into 4 ohms/140Wpc into 2 ohms (18.45dBW, 15.45dBW, 12.45dBW, respectively) Current capacity: not specified. Frequency response: 20Hz-20kHz, +0/-0.5dB. THD: <1%. IM distortion: <1% (conditions not stated). Input impedance: 100k ohms. S/N ratio: 96dB ref. rated power (weighting not stated). Sensitivity: 950mV.

25 000,00 kn

Bryston B-60 SST C-series

PREAMPLIFIER Section: FREQUENCY RESPONSE: 20Hz~20kHz +/- .05dB MAXIMUM OUTPUT: 15 volts IMD/THD: <0.005% at 3 volts out SENSITIVITY: 500mV (High level inputs) NOISE: -100dB (Ref. 500mVin), 20~20K Hz POWER AMPLIFIER Section: OUTPUT POWER: 60 watts/channel into 8 ohms 100 watts/channel into 4 ohms THD+N: <0.02% 20Hz~20KHz @ 60 watts NOISE: 106dB gwlow full output SLEW RATE: >60v/uSec DAMPING FACTOR: >500 at 20Hz (8 ohms) POWER BANDWIDTH: 0.5Hz to over 100KHz SENSITIVITY: .775v INPUT IMPEDANCE: 50K ohms; Features * 4 stereo RCA inputs * 1 stereo RCA output * 1 stereo tape loop * Headphone output * Gold plated switch, contacts and connectors * Optional remote, volume and mute * Optional DAC * Digital Circuits 5 Year Warranty * Also Available with Moving Magnet Phono Stage

15 000,00 kn

Thor MK-II

Thor, the god of war, shook the world with claps of thunder and conquered all with its awesome strength. This is the new version of the integrated amplifier Thor. Now it has even more of the earth rattling power to transform sound into music and feeling into emotion. Thor Mk.II derives its immense strength from a massive 1800 VA custom designed, toroidal transformer. The noise floor is extraordinary low and Thor Mk.II yields a seemingly endless supply of power for any load. Thor Mk-II features a fully balanced design that delivers dynamic, detailed and lifelike presentation of music. The single ended input-stage drives 16 high power matched output devices to provide 165 watts per channel into 8 ohms. Using a balanced design ensures the lowest noise and distortion achievable. Seven analogue input pairs are provided for use with 2 balanced (XLR) and 5 single-ended (RCA) sources. A pair of pre-amp outputs allows connection to an external power amplifier while using the Thor as a pre-amplifier. Technical specifications 2x165W 8 ohm - Less than 0.1% Thd 20-20Khz Bandwidth dc-200Khz Input impedance 20Kohm 1800 VA custom made, special core transformer 2 balanced inputs 5 RCA inputs...

23 000,00 kn

Rogue Audio Zeus

General Features: - Completely dual mono design - Massive high storage power supply - Ultra-high performance transformers - Built in bias meters and bias tool - All precision components - 12 x KT88, 4 x 12AU7, 2 x 12AX7 tube complement - 1" thick machined aluminum faceplate - Heavy-duty gold plated RCA connectors - Heavy-duty gold plated binding posts - Balanced and RCA inputs - Both 4 and 8 ohm binding posts - User selectable triode/ultralinear output - Fully tested, burned-in, and auditioned - Entirely designed and built in the USA Specifications: - Output power: 225 WPC - THD: less than 0.1% typical, 1% at peak - frequency response: - 20Hz -20KHz at full output, 10Hz -100KHz at 10 watts - Input sensitivity: 1.0V RMS - Dimensions: 19" W x 24" D x 12" H - Weight: 200 lbs - power requirements: 230V - 60Hz

40 000,00 kn

Unison Research SR1

Technical Sheet Output power: 80 watt per channel Outup impedance: 8 Ohm Bandwidth: 2 Hz - 70 kHz at-I dB Input impedance: 47 kOhm / 50 pF Output Stage: Improved dynamic class A symmetrical stage employing power MOSFET complementary pair Damping factor: > 50 Feedback factor: 8 dB Amplifier overdrive: Overdrive indicated for THD>1% Power consumption: 290 watt (at full output power) Dimensions (cm): 27 x 45 x 14 10.7 x 17.8 x 5.9 inches Net weight: Kg. 15

6 000,00 kn

47 Laboratory Gaincard

Output power: 25W+25W ( 8) (50W version : 50W+50W) Input impedance: 22k ( unbalanced only ) Attenuators: 12-steps for each channel Output on and off switches for each channel Dimensions: Model 4706 170(w)x40(h)x100(d)m/m Model 4700 130(dia.) x195(d) m/m

Harman Kardon AVR 7300

7 x 110W; 7.1-Channel A/V Receiver; Dolby Digital 5.1, Dolby Digital 5.1 Surround EX, Dolby Pro Logic IIx, DTS 5.1, DTS-ES, DTS 96/24, DTS Neo:6 decoding; 24-bit/96kHz DACs on all channels

Integrirano pojačalo Thule

Thule Audio Spirit IA100, 2x 100W/ 8 ohma; 2 x 160W/ 4 ohma, 12 kg

OTL Graaf GM20

6C33B,XLR

Predpojačalo Sound Carrier Resolution 88

10 x 6N1P cjevi

Pretpojačalo Gala Tube Audio Lab. NF Reference

cijevni preamp, phono

Receiver Kenwood KR-4140

1971 g, odlično stanje,sve ispravno

1 000,00 kn

Novo u ponudi

Akcija

Portfolio