8 Ohm/20Hz-20kHz: 150W(ch)
4 Ohm/20Hz-20kHz: 260W(ch)
Damping factor: >175 (single ended)
Circumgyration: >40V / uS
Power supply (4 Ohm): >16A
Transient power supply: >75A
S/N ratio: 100 dB
Frequency (20Hz-20kHz): +/-0.1dB
Shipping weight 87 lbs/pc
Weight: 82 lbs
Dimension (w x d x h ): 18.9" x 18.9" x 8.9"
Shipping box (w x d x h) 23" x 24" x 14"
Specifications:
Type: Floor standing loudspeaker
Bi-wiring compatible.
Power handling: 150/250 W
Impedance: 8 Ohms.
Sensibility: 93 dB/W/m.
Bandwith: 35 - 20000 Hz.
Weight 39.0 kg.
Number of Speakers : 6.
Impedance : 8 ohm.
Spikes
Bi-Wiring Compatible
Power admitted (W) : 150
Tweeter : 1x TZ222+ 1X T2 222
Medium : 160 mm
Boomer : 3 x 160 mm
Audio Performances
Bandwith : 35 - 20000Hz
Sensibility (dB/W/m) : 93.0
Miscellaneous
Dimensions : 255 x 1270 × 316 mm
Weight : 39.0 kg
15 000,00 kn
Audio Physic Yara II evolution.
Technical data
Height 950 mm / 38"
Width 170 mm / 6.8"
Depth 230 mm / 9.1"
Required Space
Width x Depth -
Weight 13 kg
Recommended amplifier power 20-120 W
Impedance 4 Ohm
Frequency range 42 Hz - 33 kHz
Sensitivity 89 dB
4 500,00 kn
Features :
System Type: Magnetically Shielded, 2-way Bass Reflex, Front Vented
Recommended Amplifier Power: Up to 125 watts
Nominal Impedence: 8 ohms; Minimum Impedance: 4 ohms
46-23Khz
Frequency Response:
(+/- 3db):
40 Hz
Useable Bass Response
(-10db Anechoic):
Sensitivity
anechoic 89dB
(2 speakers in a typical room): 92dB
Crossover Point: 2 kHz
Components:
Chambered 1" Aluminum Dome,
1 - 6.5" Injection Molded
Homopolymer woofer w/ NBR/SBR surround
Overall Dimensions:
W - 7.75"/19.7cm,
H - 15.5"/39.3cm,
D - 11.5"/29.1cm
Cabinet Finishes:Canadian Maple
Approx. Shipping Weight:16kg
(2 speakers)
1 500,00 kn
OB1 Specifications: Usable frequency response: 28kHz Effective line length: 3.3m (11Feet) Peak SPL@1 metre: >110dB Sensitivity: 87db 1 watt 1 metre Crossover Frequency: 380Hz & 3.8kHz 24dB per Oct, Linkwitz Riley Impedance: 6 ohms nominal Recommended Amp power: Up to 300W Drive unit complement: LF Doped, 170mm with cast alloy chassis MF Doped, 75mm Fabric soft dome HF 27mm, Silk soft dome, ferrofluid cooled Input connectors: 3 Pairs 4mm Binding posts (Suitable for Tri-Wire or Tri-Amp) Finishes Cherry, Oak, Black Ash, Dimensions H -1025 mm, W - 200 mm , D -325 mm, Weight: - 21.5 kg Plinth: Minimum plinth spike height - 28mm Options Magnetic Shielding.
18 000,00 kn
Audio Note AN-E/SPe HE High Gloss.The AN-E must be the most efficient wide band speaker of moderate size on the market, with an effective bandwidth from 18 Hz to 23 kHz at -6 dB, efficiency better than 98 dB/m and a dynamic headroom above 108 dB. The extremely high efficiency is retained well over the bandwidth, and makes the AN-E very suited to the high quality, low-power triode amplifiers that will form the future of music reproduction, once our obsession with power and specifications is generally recognized as folly. The AN-E is a two-way, ported enclosure, with a carefully designed cabinet which is shaped to enhance and aid driver dispersion on the one hand, and bass output on the other. The cabinet is lightly braced and little internal damping is used. The cabinet is designed in such a way that it augments and supports the drivers in their task, not unlike the box of a guitar. The drivers are selected and paired before they are matched to the crossover. Dimensions: (Height, Width, Depth) 790 x 360 x 270mm
50 000,00 kn
System Type : 3 Way Bassreflex
Woofer (mm/): 165
Midrange (mm/): 165
Tweeter (mm/): 25
Power (W, long/short term): 150 / 200
Sensitivity (dB, 2.8V/1m):91
Impedance (Ohm):4
Weight (kg):32,5
Overall dimensions: (HxWxD)1035 x 278 x 381.
Finishes : Cherry
Inputs Gold plated screw terminals.
7 000,00 kn
Power handling: 50 watts continuous (RMS)
Sensitivity: 87 dB
Impedance: 8 ohms
Magnetically shielded? No
HxWxD (mm) / Weight: 300 x 170 x 200 / 4.75 Kg
Frequency response: 55 - 20000 kHz
Biwireable: Yes
Connections: 4mm banana plug/binding post
Bass port? Rear ported with optional tuning bung
Drivers: HF: 25mm soft domed, LF: 130mm long throw paper cone
Extra: Tannoy speakers
1 200,00 kn
Technical Specifications: Prima System: Bookshelf or standmount, re.ex loaded with front port Drive units: 1 x 6.5 inch bass drivers – aluminium cone 1 x 1 inch tweeter - fabric dome Number of ways: 2 way Frequency response: 40-20000 Hz Cross-over: low pass: 12 dB/octave for the low pass 24 dB/octave for the high pass Crossover frequency 2300 Hz approx Power handling: 70 watt RMS Recommended ampli.er: 10 to 70 Watt RMS or more ( Without clipping ) Sensitivity: 89 dB/1watt/1 meter Nominal Impedance: 4 ohm (Z min > 3.9 ohm) Room positioning: At least 20-30 cm from side room boundary Size: 36,5 x 24 x 31,5 cm (h x w x d) Weight: 10,5 Kg
4 500,00 kn
Audio Note AN-E/SPe HE High Gloss.The AN-E must be the most efficient wide band speaker of moderate size on the market, with an effective bandwidth from 18 Hz to 23 kHz at -6 dB, efficiency better than 98 dB/m and a dynamic headroom above 108 dB. The extremely high efficiency is retained well over the bandwidth, and makes the AN-E very suited to the high quality, low-power triode amplifiers that will form the future of music reproduction, once our obsession with power and specifications is generally recognized as folly.
The AN-E is a two-way, ported enclosure, with a carefully designed cabinet which is shaped to enhance and aid driver dispersion on the one hand, and bass output on the other. The cabinet is lightly braced and little internal damping is used. The cabinet is designed in such a way that it augments and supports the drivers in their task, not unlike the box of a guitar. The drivers are selected and paired before they are matched to the crossover.
Dimensions: (Height, Width, Depth) 790 x 360 x 270mm
Woofers: Two – 8 inch (20.32 cm)
Midrange: One – 7 inch (17.78 cm)
Tweeter: One – 1 inch inverted dome (2.54 cm)
Sensitivity: 91 dB @ 1 watt @ one meter @ 1 kHz
Nominal Impedance: 4 ohms, 1.8 ohms minimum @ 92 Hz
Frequency Response: +/- 3 dB 20 Hz - 22 kHz Room Average Response
Minimum Amplifier Power: 20 watts per channel
Overall Dimensions: Height – 111.76 cm) w/o spikes
Width – 35.56 cm
Depth – 53.91 cm
System Product Weight: 89.36 kg
Total System Shipping Weight (approx.):274.42 kg
Specifications
Description: Three-way, floorstanding, reflex-loaded loudspeaker. Drive-units: 1" (25mm) inverted titanium-dome tweeter, 7" (178mm) paper-cone midrange unit, 10" (254mm) aluminum-cone woofer. Frequency response: 29Hz-22.5kHz, +0/-3dB. Sensitivity: 89dB/2.83V/m. Impedance: 4 ohms nominal, 3 ohms minimum. Recommended power: >12Wpc.
Dimensions: 1042 mm H by 305 mm W 457 mm D. Weight: 72.7 kg each.
Specifications:
Description: Two-way, reflex-loaded loudspeaker. Drive-units: 1" inverted metal-dome tweeter, two 6.5" treated-paper cone woofers. Crossover frequency: 1.8kHz. Frequency response: 50Hz–25kHz, ±3dB; 55Hz–22kHz, ±1.5dB. Sensitivity: 94dB/W/m. Nominal/Minimum Impedance: 4 ohms/2.8 ohms at 400Hz. Recommended minimum amplifier power: 7W.
Dimensions: W 243 X H 564 x D 470. Weight: 34 kg each.
ROYAL SCEPTER .Specifications:
Frequency range (+/- 3dB) [Hz]: 60 - 25.000
Sensitivity (2,83 V/1 m) [dB]: 88,0
Nominal impedance [ohms]: 4
Maximum SPL [dB]: 105
Recommended amplifier power [W]: 25 - 150
Crossover frequencies: 3600
High frequency driver: 1 x 3/4 " Soft textile dome
Low frequency driver: 1 x 5 " Polypropylene
Enclosure type: Bass reflex
Bass reflex tuning frequency [Hz]: 42,5
Connection input(s): Bi-wire
Recommended placement: Stand
Shelf
Recommended distance from wall: 0.00
Loudspeaker type: Rear
Surround
Max loudspeaker dimensions incl. base and grille (HxWxD) [mm]: 185 X 310 X 220
Loudspeaker weight [kg]: 4,9
2 500,00 kn
Model 207/2
Design: Bass reflex four-way floorstanding loudspeaker, magnetically shielded
Drive Units:2 x 250mm (10in.) LF, 1 x 250mm (10in.) LMF, 1 x 165mm (6.5in.) Uni-Q MF including a 25mm (1in.) titanium HF
Crossover Frequencies:120 Hz, 350 Hz, 2.3 kHz
Sensitivity: (2.83V/1m):91dB
Frequency Response: (+/-3dB):40Hz - 60kHz
Maximum Output: 117dB
Amplifier Requirements: 50 - 400 W
Magnetic Shielding: Yes
Impedance 8 Ohms (3.0 Ohms min)
Bass Extension 26Hz (-6dB)
Weight 66 Kg
Dimensions (H x W x D) 1226 x 400 x 685 mm
Finishes: Satin Cherry
Electrostatic panel with cone driver for low frequencies • ESL Panel Size: 40" H x 9"W • Cone Size: 8" • Crossover: 450 Hz • Lateral Dispersion: 30 degrees • Nominal Impedance: 4 Ohms - Min 1.7 Ohms at 20 kHz • Sensitivity: 89 dB/2.83 volts/m • MFR.: 40 Hz - 22 kHz ± 3 dB • Size: 55 1/2" H x 10 1/2" W x 12 1/2" D • Weight: 55 Pounds Each • Finishes: Black Lacquer
6 000,00 kn
Three-way, reflex-loaded, floorstanding loudspeaker. Drive-units: 1" concave ceramic-dome tweeter, 3.5" concave ceramic-dome midrange, two 7" Nomex/Kevlar-cone woofers. Frequency range: 28Hz–25kHz. Sensitivity: 88dB/2.83V/m. Nominal impedance: 4 ohms. Recommended power: 50–200W.
Dimensions: 41" (1040mm) H by 10" (260mm) W by 16" (410mm) D. Weight: 112 lbs (51kg) net each, +400 lbs/pair shipping.
99 000,00 kn
SYSTEM: 2 way vented box loudspeaker. CABINET: Construction with decoupled side panels for resonances and standing waves control. TWEETER: 25 mm ultra dynamic ring radiator-driver, neodymium magnet system. MID-WOOFER: 110 mm coated cellulose cone driver. CROSS-OVER: Non-resonant third order design, optimized phase characteristics for optimal space/time performance, cross-over point 4.500 Hz. FREQUENCY RESPONSE: 60 Hz – 25.000 Hz, tuning port included. SENSITIVITY: 87 dB SPL (2.83 V/1m). NOMINAL IMPEDANCE: 8 ohm. POWER HANDLING: 20W – 100W, without clipping.
3 900,00 kn
Features/Specs
* 3-way vented box system
* 1" free-mounted diamond dome tweeter
* 6" woven Kevlar cone FST midrange
* 15" Rohacell cone bass drivers
* Down-Firing Flowport technology
* Matrix interlocking cabinet bracing
* Frequency Response: 29Hz - 28kHz
* Impedance: 8 ohms
* Crossover Frequencies: 350Hz, 4kHz
* Power Handling: 50W - 1000W
* Weight: 118kg
* Cherrywood or Rosenut Real Wood Veneer Finish
* Heavy Cast Aluminum stand (plinth)
* Black Cloth Grille
50 000,00 kn
Lowther DX-2 driveri
6 000,00 kn
Drive Units 100mm (4") Uni-Q
19mm (3/4") Aluminium dome tweeter
Frequency Response 80Hz - 27kHz
Power Handling 100W
Sensitivity (2.83V/1m) 88dB
Maximum Output (SPL) 104dB
Impedance 8 ohms
Internal Volume 1.5 litres
Satellite Dimensions 130mm Width
228mm Height
150mm Depth
Centre Dimensions 190mm Width
162mm Height
150mm Depth
Weight 2kg;
Specifications for the KEF Kube 2 Subwoofer
Drive Units 2x 250mm (one active, one passive)
Frequency Response 38Hz - 150Hz
Amplifier 200W built-in Class-D
Maximum Output (SPL) 112dB
Internal Volume 23 litres
Dimensions 330mm Width
335mm Height
330mm Depth
Weight 12kg
7 350,00 kn
Technical Specifications:
JANA WALK²
Frequency range: 45-20000 Hz +-3dB
Power rating: 100 W
Sensitivity: 87 dB/w/m
Impedance: 8 ohm ( 3,4 Ohm minimum)
Type: Ported system
Drive units: One 5” midbass, 1”silk dome tweeter
Crossover frequency: First order, 2400 Hz
Terminals: Single-wire, Heavy-duty binding post
Cabinet: 18mm MDF, with deadening glue
Dimensions (WxHxD): 17,5 cm x 38 cm x 26,5 cm
Net weight per piece: 7kg
Finishes: White, Black, satin or high gloss; black or white leather
3 735,00 kn
PIMIENTA²
Frequency range: 50-20000 Hz +-3dB
Power rating: 100 W
Sensitivity: 88 dB/W/m
Impedance: 8 ohm ( 3,6 Ohm minimum)
Type: Ported system
Drive units: One 5” midbass, 3/4”silk dome tweeter
Crossover frequency: First order, 2000 Hz
Terminals: Single-wire, Heavy-duty binding post
Cabinet: 25mm MDF, with deadening glue
Dimensions (WxHxD): 18,6 cm x 33,7 cm x 32,2 cm
Net weight per piece: 9,5kg
Finishes: White, Black, satin or high gloss; black or white leather
6 600,00 kn
- Power Handling 100W, Impedance 8 Ohm, Sensitivity 87dB
- Frequency response 45Hz(-6dB)-20kHz
- Crossover 1st order 2,4 kHz,
- Dimensions: H 380 mm x W 175 mm x D 265 mm
- Weight Netto per piece 7kg
3 075,00 kn
Precision 6 PERFORMANCE Frequency Response (1) 62Hz to 51kHz Recommended Amplifier Power 60 to 120w @ 8 ohm Power Handling Average RMS (2) 60W Power Handling Programme 120W Nominal Impedance 6 ohm Sensitivity (3) 91dB for 1W at 1m Distortion <0.7% CROSSOVER Crossover Frequency 2.5kHz DRIVE UNIT Dispersion (@-6dB) 90 degrees Driver Complement Dual Concentric™ LF/MID 165mm (6”) Dual Concentric™ constant directivity driver with multi fibre paper pulp cone, Dual Concentric™ HF 25mm (1”) titanium dome, neodymium magnet system, SuperTweeter™ 25mm (1”) titanium dome, neodymium magnet system Shielded Yes CABINET Type Optimised bass-reflex loaded Construction MDF cabinet, front baffle T&G front and back Finish Black cabinet Grey painted baffle with brushed aluminium inlay Cabinet dimensions (HxWxD) 356mm x 220mm x 260.5mm (14” x 8 5/8” x 10 1/4”) Total Cabinet weight 8.9kg
2 800,00 kn
Technical Info for D100 :
Nominal Impedance
4 ohms
Recommended Amplifiers
10 to 750 watts
Frequency Response
20hz to 30Khz
Sensitivity
92db linear for 1 watt at 1 metre
Bass Driver (2)
Professional quality long-throw 10” (254mm) unit with large magnet assembly
and 3” (75mm) ribbon wound voice coil
Midrange Driver (2)
Studio quality 3” (75mm) soft dome unit with double suspension
Tweeter
ProAc 1” (25mm) soft dome with special surround and front plate
Crossover
HQC crossover using dedicated components wired throughout with ProAc multistrand
oxygen-free copper cable. Split for optional bi-wiring and bi-amping.
Dimensions
65” (1650mm) high on plinths with conical feet
12” (305mm) wide
19” (482mm) deep
Weight
131kg /cabinet
Mode
Floorstanding
Grille
Acoustically transparent crimplene
Karakteristike zvučnika Lowther EX-4;Depth 8.5 cm;Depth from Rear of Mounting Frame 7.9 cm;PCD Mounting Centres 20.8 cm;Baffle hole cut-out 19 cm;Magnet Ring Diameter 9.0 cm;
Voice coil diameter 3.9 cm;Voice coil impedance (options) 4, 8 or 15 ohm
D.C. resistance Zmin 7.2 ohm;Nominal Power Handling 100W;Sensitivity at 1m/1kHz/1watt 99 db;Frequency response 30 Hz - 22.5 kHz
37 500,00 kn
Tehnički podaci
Niskotonac 6,5" 165mm B/M
Visokotonac 1" 25mm tex
Snaga 20-100W
Impedancija 6ohm
Osjetljivost 86dB
Frekv. raspon 40-24k @ -6dB
Crossover 2.0kHz
Frequency Fb 40Hz
Dimenzije 223x800(850 na prizmama)x301
2 000,00 kn
Frequency range +/- 3 dB [Hz]: 45 – 34.000
Sensitivity (2.83V/1m) [dB]: 86.0
Nominal impedance [ohms]: 6
Maximum SPL [dB]: 106
Recommended amp. power [Watts]: 40 – 120
Crossover frequencies [Hz]: 40 – 120
Hybrid tweeter module: 1 x 28 mm soft dome, 1 x 17 x 45 mm ribbon
Low frequency driver(s): 1 x 5"
Enclosure type: Bass reflex
Bass reflex tuning frequency [Hz]: 47.0
Connection input(s): Single Wire
Recommended placement: Stand, shelf, on wall (via wall mount kit)
Dimensions (H x W x D) [mm]: 318 x 162 x 241
Weight kg: 5.2
Finish: Black Ash
5 500,00 kn
30 Hz-22 kHz; Dispersion: 30 Degrees; Sensitivity 89 dB 2.83 V/m; Impedance: Nominal: 4 ohma: Minimum : 1.5 ohms at 20 kHz ; Air Core Coils; Polypropylene capacitors;
Orginalna ambalaľa.
12 000,00 kn
Type 2-way compact bass-reflex speaker
Drivers 5" (13cm) Polyflex mid-bass
3/4" (19mm) mylar tweeter dome
Frequency response (+/- 3dB) 75Hz - 20kHz
Low frequency point (- 6dB) 69Hz
Sensitivity (2.83V/1m) 90dB
Nom. impedance 8 ohms
Crossover frequency 3 500Hz
Recommended amplifer power 15 - 75W
Dimensions (HxWxD) 103/4x59/16x67/16"
(247x142x164mm)
Net weight 4.6lbs (2.1kg)
35Hz - 20kHz,89dB,NOVO
http://www.u-vola.com/specifiche_tecniche_eng.html
20 000,00 kn
